Which Brake Lathes Do O’Reilly Auto Parts Use?
What Type of Brake Lathes Does O’Reilly Use?
O’Reilly Auto Parts uses professional-grade brake lathes for resurfacing brake rotors and drums. While specific models may vary by location, the most commonly used brands include:
- Hunter Engineering – Known for precision and durability, Hunter lathes are used in many O’Reilly locations.
- Ranger (BendPak) – A popular choice for shops and auto parts stores due to its reliability and ease of use.
- Ammco – One of the most widely recognized brands in brake lathes, often found in O’Reilly service areas.
- Pro-Cut – Some locations may use Pro-Cut on-car brake lathes for high-precision resurfacing.
Does O’Reilly Resurface Rotors and Drums?
Yes! Many O’Reilly Auto Parts stores offer rotor and drum resurfacing services using their in-house brake lathes. However, availability varies by store, and some locations may not have the equipment for this service.
How Much Does It Cost to Resurface Rotors at O’Reilly?
Pricing for rotor or drum resurfacing typically ranges from $10 to $20 per rotor/drum, but costs may vary based on location and condition of the part.
How to Check if Your Local O’Reilly Has a Brake Lathe
Since not all O’Reilly stores have brake lathes, it’s best to:
- Call your nearest store and ask if they offer resurfacing services.
- Check online on O’Reilly’s official website or service locator.
- Visit in person and ask an associate.
Final Thoughts
O’Reilly Auto Parts primarily uses Ammco, Hunter, Ranger, and Pro-Cut brake lathes for resurfacing rotors and drums. While many locations offer this service, availability varies, so it’s best to check with your local store before visiting.
FAQs
1. Does every O’Reilly Auto Parts store have a brake lathe?
No, not all locations offer resurfacing services. Call ahead to check.
2. Can O’Reilly resurface slotted or drilled rotors?
It depends on the condition and thickness. Some stores may not resurface these types.
3. How long does it take to resurface rotors at O’Reilly?
Usually 30 minutes to an hour, depending on workload and rotor condition.
4. Is it cheaper to resurface rotors or replace them?
Resurfacing is usually cheaper, but if rotors are too worn, replacing them is recommended.
5. Do other auto parts stores resurface rotors?
Yes, stores like AutoZone and NAPA may also offer rotor resurfacing at select locations.
Also Check:
